Weldon Paints | Weldon Paints Pakistan | Weldon Paints Lahore | Weldon Paints Karachi
Stoving 2K Paints
An economical good quality Stoving paint gives durable tough film and uniform appearance.
PRODUCT NAME:
Stoving 2K Paints
USAGE:
For decoration and protection of iron interior and exterior conditions.
COMPOSITION
Based on ALKYED RESIN and durable pigments.
MIXING RATIO:
DOUBLE pack.
COVERING CAPACITY:
14-15 m2/liter/coat on non porous surfaces.
NO OF COATS:
Two
DRYING TIMES:
Surface dry:             20--30 minutes(WHEN STOVE 120---150C) 
PACKING:
Available in 3.276 LITER
APPLICATION:
conventional spray.
COLOUR RANGE:
wide range available
THINNER
Weldon Stoving Thinner
Gloss:
High
PROCESS AND APPLICATION:
Surface Preparation

New unpainted iron surfaces
Remove all dirt and grease etc by wiping with suitable solvent. Remove all the rust by scraping,

Previously painted iron surfaces
Clean the surface by removing all dirt and grease. Remove loosely adhering or defective paint .It will give excellent finish and smooth silky effect.
Finishing:
Stir and mix the Both clear and hardener to give smooth consistency after thinning WELDON STOVING THINNER, apply 1-2 coats of Weldon STOVING 2 k PAINTS..
PRECAUTIONS:
Keep the tin air tight when not in use.
FLAMMABLE, VAPORs HARMFULL, MAY CAUSE IRRITATION,
KEEP AWAY FROM HEAT
IF EFFECTED BY INHALATION OF VAPORS, TRANSFER TO FRESH AIR AND CONSULT TO DOCTO.R
In case of eye contact wash with the plenty of water Wash brush, scraper and other equipment with XYLENE OR WELDON STOVING THINNER.
Keep away from children.