Weldon Paints | Weldon Paints Pakistan | Weldon Paints Lahore | Weldon Paints Karachi
Water Base Road Marking Paint
An economical water born road marking paint with good coverage and smooth finish. It is economical an give high out put.
PRODUCT NAME:
Water Base Road Marking Paint
USAGE:
Suitable for all the interior masonry surfaces such as brick, concrete ROADS. It is particularly for ceilings .
COMPOSITION:
Single pack, ready to use after 30% thinning with water.
COVERING CAPACITY:
4-7 m2/liter/coat
FILM THICKNESS:
20-25 microns per coat.
NO OF COATS:
Two or Three
DRYING TIMES:
Surface dry:              30 minutes   
Recoat able:             2 Hours   
Hard dry:                 2-4  Hours
PACKING:
3.64 liter and 14.56 liter packs.
APPLICATION:
stir well before application
COLOUR RANGE:
white ,yellow
THINNER
Water
Gloss:
MATT
STORAGE SHELF LIFE:
1 year
Open time for traffic:
2 Hours 
PROCESS AND APPLICATION:
Surface Preparation
Surface must be dry and clean. In general preparation will include: For new surface remove all loose powder by sweeping with sand paper. Apply a sealing coat with Weldon Wall putty. Allow the filler to dry overnight before painting with emulsion paint. For old surfaces, necessary repair work of cracks and defective rendering should be done before painting. Remove all moss, mold growth. Remove poorly adhering or powder coating. Apply sand paper to get smooth surface. For best results apply one coat of Weldon wall primer sealer. It will give excellent finish and smooth silky effect.
Finishing:
Stir and mix the paint to smooth consistency after thinning with water, apply 2-3 coats of Weldon Silky Vinyl Emulsion.
PRECAUTIONS:
Keep the tin air tight when not in use.
Wash brush, scraper and other equipment with plenty of light detergent water.
Keep away from children.