Weldon Paints | Weldon Paints Pakistan | Weldon Paints Lahore | Weldon Paints Karachi
Weather Seal'd
An economical water born emulsion paint with good coverage and smooth finish. It is economical and gives high out put.
shade card
PRODUCT NAME:
Weather Seal'd
USAGE:
Suitable for all the exterior masonry surfaces such as brick, concrete, plaster and similar surfaces. It is particularly for ceilings.
COMPOSITION:
Based on acrylic emulsion binder.
MIXING RATIO:
Single pack, ready to use after 50% thinning with water.
COVERING CAPACITY :
12-14 m2/liter/coat
FILM THICKNESS:
20-25 microns per coat.
NO OF COATS:
Two or Three
PACK SIZE:
Available in 1 1iter and 4 liter.
COLOUR RANGE:
Wide range available ,See appropriate shade card
DRYING TIMES:
Depends on temperature, humidity, air movements & film thickness
Surface dry:              30 minutes  
Recoat able:             2 Hours   
Hard dry:                  2-4  Hours
APPLICATION :
Brush, Roller or conventional spray.
THINNER :
Water
FLASH POINT :
Not applicable
GLOSS :
MATT
PROCESS AND APPLICATION:

Surface Preparation

Surface must be dry and clean. In general preparation will include: For new surface remove all loose powder by sweeping with sand paper. Apply a sealing coat with Weldon weather sealed Wall putty. Allow the filler to dry overnight before painting with emulsion paint. For old surfaces, necessary repair work of cracks and defective rendering should be done before painting. Remove all moss, mold growth. Remove poorly adhering or powder coating. Apply sand paper to get smooth surface. For best results apply one coat of Weldon wall primer sealer.

Finishing

Stir and mix the paint to smooth consistency after thinning with water, apply 2-3 coats of Weldon weather sealed Emulsion.
PRACTICAL COVERAGE:
A guide to the practical coverage which can be achieved under normal conditions is 13 – 19 m2 /liter /coat.
PRECAUTIONS:
Keep the tin air tight when not in use.
Wash brush, scraper and other equipment with petrol or mineral turpentine.
Keep away from children.